Cub Cadet LTX1040 Manual Del Usuario página 18

Engaging the PTO
Engaging the PTO transfers power to the cutting deck or other
(separately available) attachments. To engage the PTO:
1. Move the Throttle/Choke control lever to the FAST (rabbit)
position.
2. Push the PTO/Blade Engage lever forward into the engaged
(ON) position.
NOTE: Always operate the tractor with the Throttle/
Choke control lever in the FAST (rabbit) position for the
most efficient use of the cutting deck or other (separately
available) attachments.
Mowing
WARNING!
thrown object injury, keep bystanders, helpers,
children and pets at least 75 feet from the machine
while it is in operation. Stop machine if anyone
enters the area.
The following information will be helpful when using the cutting
deck with your tractor.
WARNING!
discharge of materials toward roads, sidewalks,
bystanders and the like. Also, avoid discharging
material against a wall or obstruction which may
cause discharged material to ricochet back toward
the operator.
• Do not mow at high ground speed, especially if a mulch kit
or grass collector is installed.
• Do not cut the grass too short. Short grass is prone to weed
growth and yellows quickly in dry weather.
• Always operate the tractor with the throttle lever in the
FAST (rabbit) position while mowing.
• For best results, it is recommended that the first two laps
be cut with the discharge thrown towards the center.
After the first two laps, reverse the direction to throw the
discharge to the outside for the balance of cutting. This will
give a better appearance to the lawn.
• Do NOT attempt to mow heavy brush and weeds or
extremely tall grass. Your tractor is designed to mow lawns,
NOT clear brush.
• Keep the blades sharp and replace the blades when worn.
18 s 5— O
ectiOn peratiOn
To help avoid blade contact or a
Plan your mowing pattern to avoid