General Instructions - H.Koenig STM20 Manual De Utilización

PREPARATIONS
Soft the laundry to be ironed according to the international symbols on the garment label, or if this
is missing, according to the type of fabric.
Garment label
Start ironing the garments requiring a low temperature.
This reduces the waiting times (the iron takes less time to heat up than to cool down) and eliminates
the risk of scorching the fabric.

GENERAL INSTRUCTIONS

When using the iron for the first time, you may notice a slight emission of smoke and hear some
sounds made by the expanding plastics. This is quite normal and it stops after a short time. We also
recommend passing the iron over an ordinary cloth before using it for the first time.
Start ironing the garments requiring a low temperature.
This appliance cannot be automatically turned off. After use it, you must press the switch to turn
off and unplug the power cord.
The appliance will automatically enter the standby mode after 5 minutes of
non-use. Please pay attention.
CLEANING
Please note: before cleaning the iron in any way, make sure
that the appliance plug is not connected to the socket.
Any deposits, starch residue or size left on the plate can be
removed using a damp cloth or an unabrasive liquid
detergent.
Avoid scratching the plate with steel wool or metallic objects.
The plastic parts can be cleaned with a damp cloth then
wiped over with a dry cloth.
Fabric Type
synthetic
silk - wool
Cotton - linen
Fabric not to be ironed
Thermostat Regulation
1 level low temperature
st
1 st level low temperature
2 level high temperature
nd