Tabla de contenido
Publicidad
TROUBLE SHOOTING
Fault situation
Appliance
cannot
work after turn on
The appliance work
normally
but
no
steam
Iron
head
with
water
Leaking water
Scale & white fine
in the bottom of the
iron head
Watermark
appears on clothes
when ironing
ENVIRONMENT
CAUTION:
Do not dispose of this product as it has with other household products. There is a separation of this waste product into
communities, you will need to inform your local authorities about the places where you can return this product. In fact,
electrical and electronic products contain hazardous substances that have harmful effects on the environment or human
health and should be recycled. The symbol here indicates that electrical and electronic equipment should be chosen
carefully, a wheeled waste container is marked with a cross.
Adeva SAS / H.Koenig Europe - 8 rue Marc Seguin - 77290 Mitry Mory - France
www.hkoenig.com - sav@hkoenig.com - contact@hkoenig.com - Tél: +33 1 64 67 00 05
Reason
1
No power plug is plugged in
2
Home Circuit or fuse in the
socket are fault
3
The appliance circuit is fault
1
Water has no water or too less
water.
2
Silicone tube twists and turns
3
Heating element damaged
4
Indicator normal but no steam
5
Pump does not work
6
Pump is working
1
Just use the first have those
problem, then no more effluent
in the next time
2
Water us very serious, and it
keeps leaking
Water tank is connected to the
appliance to connect the water.
Fine impurity and chemicals in the
water are deposited on the surface
of the heating body.
When the clothes are ironed for
period of time, the watermark
appears on the clothes, which is due
to condensation of steam on the
ironing board
Solution
1
Please plug the plug again.
2
Please repair your electricity system or
socket.
3
Please contact our repair center for
maintenance.
1
Please add distilled water into the water
tank
2
Please contact our repair center for
maintenance
3
Please contact our repair center for
maintenance
4
Please contact our repair center for
maintenance
5
Please contact our repair center for
maintenance
6
Please re-assembling the pump again.
1
It's normal, please comfort to use it.
2
Please contact our repair center for
maintenance
Please re-assembling the water tank
Clean with a damp cloth
Do not use steam, then dry the water & dry
it. If the bottom of the ironing board is wet,
dry it with a dry cloth.
Publicidad
Tabla de contenido
