Moving The Refrigerator; Remove The Base Grille - GE Profile GSMF2LEB Manual De Uso Y Cuidado

MOVING THE REFRIGERATOR

LOADING THE RERIGERATOR
1
ONTO A HAND TRUCK
Leave all tape and door pads on doors
until the refrigerator is in its final location.
To move the refrigerator, use a padded
hand truck. Center the refrigerator on the
hand truck and secure the strap around
the refrigerator. DO NOT OVERTIGHTEN
THE STRAP.

REMOVE THE BASE GRILLE

2
Remove the grille by removing the two
Phillips head screws.
Installation Instructions
67
If the refrigerator must go through
any entrance that is less than 38"
wide, the doors must be removed.
Proceed to Step 3.
DO NOT remove the handles.
If all entrances are more than
38" wide, skip to Installing
the Refrigerator.
DISCONNECT THE WATER
3
COUPLING (on some models)
If the refrigerator has a water dispenser,
there is a water line from the cabinet into
the bottom hinge on the freezer door that
must be disconnected.
To disconnect, push in on the white collar
of the coupling and pull out the tubing.
Bottom
freezer
hinge
White collar