Cleaning The Dust Cup; Cleaning The Filter - Shark WV251EU Instrucciones

MAINTENANCE

CLEANING THE DUST CUP

1
3
1. With the dust cup open and the power off, slide the filter
housing forward to remove.
2.
Open the dust cup and press the release tab.
3. While pressing the tab towards the dust cup pull the dust cup
away from the unit. Handwash with lukewarm water only and
leave all parts to air-dry before reinstalling.
4. To reinstall, slide the dust cup tab into the slot on the bottom of
the nozzle until it clicks into place.
NOTE: Do not wash any part of this vacuum or its accessories in a
dishwasher.
2
1. With the dust cup open and the power off, pinch both sides of
4
the filter housing and slide forward to remove.
2. Lift the filter by the metal ring to remove it from the housing.
To clean the fabric filter, tap to remove dust and large particles.
To deep clean, hand-wash only with lukewarm water and leave to
air-dry for 24 hours before reinstalling.
To clean the filter housing, make sure the filter is removed, then
hand-wash only with lukewarm water.
LIGHT INDICATOR
Light blinking blue
Light blinks blue twice, then pauses
Solid blue light
Blue light fades in and out steadily
Dim blue light
No light
MAINTENANCE

CLEANING THE FILTER

1
TROUBLESHOOTING
WHAT IT MEANS
Low battery.
Blockage. Turn off power and
remove blockage, then turn
power back on.
Power is on.
Unit is charging.
Unit is fully charged.
Power is off, or unit needs to be
charged.
2