Operating Your Radio - Insignia IN-FR10111 Guia Del Usuario

IN-FR10111.book Page 6 Saturday, January 29, 2005 2:56 PM

Operating your radio

Power on/off and volume
Rotate the Power/Volume knob clockwise to turn the radio on and increase
the volume level. Rotate the control counter-clockwise to reduce the volume
level and to turn the radio off.
During Power On:
• The radio beeps three times with different tones
• The LCD displays a "self-test" message for one second
• The LCD display indicates the last channel selected.
Transmitting and receiving a call
To communicate, all radios in your group must be set to the same channel
and Privacy Code.
To transmit a call:
1 For maximum clarity, hold the radio two to three inches from your mouth.
2 Press and hold the PTT button and speak in a normal voice into the
microphone. The TX icon appears continuously on the LCD display while
transmitting.
3 To receive a call, release the PTT button. The RX icon appears on the
display when your radio is receiving a transmission.
A
BOUT RANGE
Your Insignia radios are designed to give you maximum range under optimum
conditions.
Optimum Conditions are:
• Over water
• Open rural areas without obstructions
• Flat areas where you can see the other person
To ensure you get maximum range:
• Be sure to use fresh or fully charged batteries. Low batteries will cause
low power conditions.
• Be sure you are on a GMRS channel. FRS channels are restricted by the
FCC to low power.
• Be sure to set your radio to use Hi power. The radio is automatically set to
Low power to preserve battery life.
6
www.Insignia-Products.com
IN-FR10111 GMRS/FRS Radio