Rexing S1 Guia De Inicio Rapido página 10

To format the memory card, make sure you have inserted your
memory card, then turn on the device by connecting to a
power source. Press Left Navigation Button to stop recording.
Then press the MENU button twice to enter the System Setup
Menu.
Use the RIGHT and LEFT navigation buttons and go to the
Format setting. Press the OK button to confirm the selection.
You may now disconnect from power. The camera will shut
down after 3 seconds. The camera should begin recording
automatically the next time it is powered on.
10
Press the Menu
button twice
Press the YES
button to confirm
formatting the
card