Ferroli SKY ECO F Instrucción De Uso, Instalación Y Mantenimiento página 68

1 USER'S MANUAL
The new SKY ECO F is an instantaneous, high-
performance, low-emission heater for domestic hot
water production, powered by natural gas or LPG and
equipped with a compact,
chamber, MODULATING fan, and control system with
microprocessor.
1 2
6 7
1
temperature
Key for decreasing the
3 Multifunction display
4 Reset key
5 On/Off key
6 OFF symbol
the control panel screen will show the current
outlet temperature.
This temperature will increase or decrease as the
sensor temperature reaches the preset value.
In the event of a malfunction (see section 3.4), the LCD
will display the error code, along with
during the waiting periods.
EN
burner,
3 4 5
8 9 10
7 Burner on and current po-
this indicates a combustion
fault.
8
9 Connection for technical
support
10 LCD panel
cod. 3541S170 - Rev. 00 - 02/2019
Plug the unit into the mains.
Press the ON/OFF key on the control panel for 1
second.
Turning the unit off
is deactivated.
To turn on the unit, press the
cond. The will display the version of the
by the current
Turning the unit on
Open the gas cock located before our unit. The unit will
operate whenever domestic hot water is demanded.
In operation
Press the and
temperature between 40ºC and 50ºC. As you can see,
pressed.
Minimum temperature
SKY ECO F
key again for 1 se-
temperature.
keys to adjust the