Ferroli SKY ECO F Instrucción De Uso, Instalación Y Mantenimiento página 74

ADJUSTMENTS
tory-set for one of the two types of gas, as indicated on
the packaging and technical data plate. To operate the
unit with another type of gas, a conversion kit must be
used:
Code Name
FOR AN 11 L HEATER
FOR A 14 L HEATER
FOR AN 11 L HEATER
FOR A 14 L HEATER
FOR A 17 L HEATER
FOR A 17 L HEATER
COMMISSIONING
74
EN
Carefully verify the tightness of the gas installation
using a soap and water solution to check for leaks in
the connections.
-
Fill the hydraulic system and make sure no air is
-
present in the unit or system.
Check that there are no water leaks in the system or
unit.
Make sure the grounding and the connection to the
electrical installation are suitable.
Check that the gas pressure is correct.
near the heater.
-
To avoid damaging the connections, do not place
down.
Turn on the unit.
Make sure the fuel and water systems are tight.
the heater is operating.
Make sure the gas valve modulates correctly.
off several times.
Check that the fuel consumption is as indicated.
MAINTENANCE
In order for the unit to operate correctly, an authorized
technician must perform an annual inspection, checking
that:
etc.) operate correctly.
stacles and leaks.
The burner and exchanger are free of dirt and deposits.
Do not use chemicals or steel brushes to clean them.
The electrode is free of deposits and properly positio-
ned.
The gas and water systems are perfectly tight.
-
The gas delivery and operating pressure values are as
indicated on the tables.
cod. 3541S170 - Rev. 00 - 02/2019
SKY ECO F
-