Philips Geometricks HP4696 Manual De Instrucciones página 12

ENGLISH
12
Troubleshooting
If problems should arise with your styler and you are unable to solve
them by means of the troubleshooting guide below, please contact a
Philips service centre or the Philips Customer Care Centre in your
country.
Problem
The appliance does not work at all.
The styling results are not what you
expected.
Solution
Perhaps there is a power failure or the
socket is not live.
Check if the power supply is working.
If it is, check whether the socket is live
by plugging in another appliance.
Perhaps the appliance overheated and
switched itself off.
Unplug the appliance and let it cool
down for a few minutes.
Make sure that the voltage indicated
on the appliance corresponds to the
local mains voltage.
Perhaps the mains cord of the
appliance is damaged.
The mains cord must be replaced by
Philips, a service centre authorised by
Philips or similarly qualified persons in
order to avoid a hazard.
Perhaps you didn't let the appliance
heat up long enough.
Let the appliance heat up until the
ready dot has changed colour.
Perhaps you wound too much hair
round the barrel or put too much hair
between the plates.