Grundig Selio ECO Manual De Instrucciones página 115

6. Using the Multi-Handset capabilities
These functions are used for handset management when two or more handsets are registered
on the same base.
6.1.
Intercom Call/Intercom
1. Make sure your handset is on standby mode.
INT
2. Press the
- If your installation has two handsets, the second handset is directly called, and "HANDSET"
followed by the handset number are displayed on the screen.
- If you have more than two registered handsets, the display shows the INT icon and the
number of all registered handsets
- Enter the desired handset number or press the
registered handsets are ringing.
3. On the called handset, press the
6.2.
Answering an internal call
1. The ring melody from an internal call is different from an external call. " HANDSET " and the
calling handset number appear on the screen. " " is blinking.
2. Press the
3. Ending an internal call press the
6.3.
Call management
6.3.1. An external and an internal call
Transfering an external call to another handset registered on same base
1. During a call, press
2. Enter the internal call number. When the user answers, you can announce the call.
3. Press the
To switch from one call to another, press and hold down the
Note!
signal is heard.
Note!
If the called handset does not answer, press
Making conference calls (3-way conversation)
You can connect one external call to two handsets registered at the base station. All users can
talk and listen simultaneously:
INT
1. Press
2. Enter the internal call number. Wait until the internal user answers.
3. Press and hold
"conference" is displayed on the handset screen.
6.3.2. Two outside calls
Taking a second call while you are already on line
During a call, a beep is emitted by your operator to inform you that a second call is on hold. A
screen displays the number of this second caller on hold.
Press then the key
Your first contact is put on hold and you can talk with the second caller.
key on the handset.
key to answer. The " " stop blinking.
INT
. The external user is put on hold.
key to transfer the call.
key. The external user is put on hold.
INT
key, until an aural signal is heard to start a three-way conference.
to take back this new call.
abc
key if you want to call all handsets. All
key to answer.
key.
INT
to take back the call.
- 10 -
English
key until an aural