POWER SUPPLY
Mains operation
Note:
Check that the mains voltage on the type
7
plate (on the bottom of the device) corre-
sponds to your local mains supply.
If this is not the case, contact your specialist
dealer.
1
Insert the supplied power cable into the
»AC ~
« socket on the left of the device.
2
Plug the mains cable into the socket (230 V ~ ,
50/60 Hz).
Caution:
The device is connected to the mains with
7
the power cord. Pull out the power cord
when you want to completely disconnect
the device from the mains.
Unplug the mains plug to disconnect the de-
7
vice from the mains. Make sure the power
plug is easily accessible during operation
and not hindered by other objects.
Note:
If there are batteries in the device, these are
7
switched off automatically during mains op-
eration.
Battery operation
You can also operate the device using standard
batteries (not supplied). In this case, you must
disconnect the mains power cable.
1
Open the battery compartment by pressing
the area marked »OPEN« and lifting the covo -
er.
2
Insert four batteries (Type IEC/4 x1.5V/
AM 1/LR 20/D size) according to the polar-
ity marked on the battery compartment.
3
Close the battery compartment
_____________________________________________________
Notes:
7
7
Environmental note:
7
Inserting back-up batteries
During mains operation, the back-up batteries
ensure that stored settings are not lost in the
case of a power failure or when the device is
briefly disconnected from the mains.
1
Open the battery compartment by pressing
the area marked »OPEN« and lifting the covo -
er.
2
Open the battery compartment of the back-up
batteries. When inserting the batteries (micro
type, 2 x 1.5V/AM 4/LR 03/AAA size) in
the small compartment, observe the polarity
marked on the compartment base.
Note:
7
Do not expose the batteries to extreme heat,
caused for example by direct sunlight, heat-
ers or fire.
Remove the batteries when they are flat or
when you know that the device will not be
used for a long period of time. When the
batteries are low, a battery symbol appears
and flashes in the display. This function does
not work when the power cable is plugged
into the device. The manufacturer accepts
no liability for damage resulting from leak-
ing batteries.
Batteries, including those which contain no
heavy metal, may not be disposed of with
household waste. Please dispose of used
batteries in an environmentally sound man-
ner. Find out about the legal regulations
which apply in your area.
If no main batteries are inserted and there is
no mains power supply, you have approxi-
mately 10 seconds to change the back-up
batteries.
ENGLISH
17