Hozelock Pico Power Manual De Instrucciones página 5

GB
(Original Instructions)
CAUTION
Read these instructions carefully before
using this machine.
This machine is intended for domestic use
(non-professional) use only.
Contents
A Instruction Booklet
B Pico Power Pressure Washer
C Cable bracket & Screws
D Detergent Tank
E Gun
F Lance Extension
G Variable Spray Nozzle
H Turbo Spray Nozzle
I Inlet Filter
J Waterstop Connector
K
6m High Pressure Hose
L Nozzle Cleaning Tool
Safety Rules / Other Risks
SYMBOLS:
Read instruction manual
WARNING, CAUTION or
HAZARD
Electrical Warning
Machine not suitable for
connection to potable mains
water
Never point the gun at
people, animals, live electrical
equipment or the machine
itself
This product is rated in insula-
tion class II. This means it has
reinforced or double insulation
This product complies with the
relevant European directives
SAFETY "DO NOTS"
High pressure jets can be dangerous if
subject to misuse. Do not direct the
water jet at people, animals, live
electrical equipment or the machine
itself.
Do not use the machine within range of
people unless they wear protective
clothing.
Do not direct the jet against yourself or
others in order to clean clothes or
foot-wear.
Do not use the appliance when raining.
To avoid the risk of explosion, do not use
the appliance with inflammable or toxic
liquids, or any products which are not
compatible with the correct operation of
the appliance.
High pressure cleaners must not be used
by children or untrained personnel.
Do not use the appliance if the high
pressure hose, the gun, lances or nozzles
are damaged.
Do not move the appliance by pulling on
the electrical cable.
Do not operate the product if it has a
damaged power cord or plug. If the
power cord or plug is damaged, it must
be replace by an Authorised Service
Centre.
Do not touch the plug and/or socket with
wet hands.
Do not jam the trigger in the operating
position.
Check that the rating plate is affixed to
the appliance. If not, inform your dealer.
Units without rating plates must not be
used as they are unidentifiable and
potentially dangerous.
Do not tamper with or alter the
calibration of the safety valve.
Do not alter the original diameter of the
spray head nozzle. May cause hazardous
5