Plantronics Walker AMERIPHONE VCO Instrucciones De Operación página 27

IMPORTANT INSTRUCTIONS
Special Features
LV A MSG GA" to greet each
caller.
To Turn on the Answering Machine:
1. Pick up the handset.
2. Press the AUTO ANS
button. The screen reads:
"AUTO ANS ON 00 MSG
1=READ 2=ERASE 3=OFF".
The number of old
messages previously
received will be displayed
until you erase them. Erase
old messages when not
needed to ensure enough
memory for new messages.
3. Hang up the handset. The
answering machine is now
ready to take messages.
To Play back Recorded Messages:
1. The screen will indicate the
number of messages you
have received.
2. Press 1 to read your
messages. Or press 1 again
24
to fast forward to the next
message. When finished,
press 2 to erase messages.
3. Press 3 to turn off the
answering machine.
Programming your Password (for
remote message retrieval only):
For security, you can set up a
personalized password to protect
the privacy of the messages left on
your VCO answering machine.
1. Lift handset and press
AUTO ANS.
2. Press 4.
3. Type your password after
the " / " by following the
typing procedures.
4. When complete, press
SELECT to return to auto
answering mode.
5. When you retrieve your
messages remotely, you must
enter your password exactly.
See section below.