Zagg Surface Pro 3 Manual De Instrucciones página 6

1. Restart your Surface.
2. Turn your Slim Cover off and back on. You should see the LED
illuminate briefly; if not, charge your Slim Cover.
3. After charging, turn your Slim Cover on. If the LED does not
illuminate, and your keyboard doesn't operate correctly, please
contact Zagg's customer service.
4. If your Slim Cover cannot establish or maintain a Bluetooth
connection, reset the Bluetooth module by charging your keyboard.
5. Forget and re-pair your Slim Cover.
6. Push one of the Pair keys on your Slim Cover and watch for the
LED to flash blue.
7. Your Surface should display "ZAGG Slim Cover" as an available
device. Select it, and then choose Pair.
8. If your tablet gives you an error message, repeat the pairing
process.
For more help; please see our FAQ section at: www.zagg.com/faq
To reach a trained customer service representative, please use one of the
following: ZAGG.com/support/contact.php | questions@zagg.com
1-800-700-ZAGG [9244] | 00-1-801-839-3906 for international customers
For unparalleled scratch protection for your Surface, we recommend
Zagg's InvisibleShield®.
©2015 ZAGG Inc. All Rights Reserved.
PATENT PENDING | NASDAQ: ZAGG | MADE IN CHINA
Microsoft Surface® is a trademark of Microsoft Corporation in the U.S. and
other countries.
Bluetooth® is a trademark of Bluetooth SIG, Inc.
ZAGG®, InvisibleShield®, and Zagg Slim Cover are trademarks of Zagg Inc.
5