U.S.Robotics SureConnect 8500 Instalación página 10

After configuring the TCP/IP settings, the modem does not
establish a connection to the Internet.
Possible Solution: Possible Solution:
Possible Solution: Possible Solution: Possible Solution:
• Double-check the ATM settings of the modem.
Click the DSL icon in your Windows system tray
located in the right, lower corner of the screen
near the clock, or go to the Control Panel by
clicking Start
Double-click U.S. Robotics USB ADSL Modem
• Verify that the VPI, VCI numbers, and the Encap-
sulation settings match what your DSL Internet
Service Provider has provided. If they are not
correct, refer to the documentation and/or CD-
ROM provided by your DSL Internet Service
Provider.
The installation failed.
Possible Solution: Possible Solution:
Possible Solution: Possible Solution: Possible Solution:
You will need to uninstall the failed installation.
• Click Windows Start
Control Panel Control Panel. Control Panel
Control Panel Control Panel
• Click Add/Remove Programs Add/Remove Programs Add/Remove Programs. Add/Remove Programs
Add/Remove Programs
• Locate the U.S. Robotics USB ADSL Modem
double-click. You may have to scroll down to
locate this program.
•
The DSL Modem Installer screen will display,
click the Remove
• Select Y Y Y Y Y es es es es es to confirm that you want to remove the
software. Do not unplug the USB cable until
drivers are removed and a reboot is requested.
Start Start, Settings Start Settings Settings, and Control Panel Settings
Start Settings
U.S. Robotics USB ADSL Modem U.S. Robotics USB ADSL Modem. U.S. Robotics USB ADSL Modem
U.S. Robotics USB ADSL Modem
Start Start, select Settings Start
Start
U.S. Robotics USB ADSL Modem U.S. Robotics USB ADSL Modem
U.S. Robotics USB ADSL Modem and U.S. Robotics USB ADSL Modem
Remove Remove
Remove Remove button.
Control Panel. Control Panel Control Panel
Control Panel
Settings followed by Settings Settings
Settings
9 9 9 9 9