Terrano -X Manual De Usuario página 11

INTERCOM
The TERRANO-X gives you smooth and continuous intercom communication with other
riders at a range of up to 1,640 ft. / 500 m (subject to terrain). Intercom communication
(one on one) is possible between up to five riders, i.e you and four other TERRANO-X users,
through the available channels ("A", "B", "C" or "D").
To chat with another TERRANO-X user via Intercom, first pair the TERRANO-X devices to each other.
Pairing is a one-time process. Once paired, the TERRANO-X units will automatically recognize each other
whenever they are at close range.
If you have purchased the double pack, both units are factory-paired to communicate via their respective Channel
"A" Buttons. If for any reason you have to pair them again, OR if you purchased a single TERRANO-X and wish to pair
with a second unit to make Intercom calls, see below.
INTERCOM PAIRING
1. Make sure both units are near each other and in Standby or just after power on (
2. Choose the Intercom Channel you wish to pair (see table below) and enter Intercom Pairing mode by pressing
the relevant buttons for 5 seconds until the LEDs begin flashing rapidly.
INTERCOM CHANNEL
"A"
"B"
"C"
"D"
3. Enter Intercom Pairing mode on the second unit, and after a few seconds, both units will show a solid
LED for 2 seconds, indicating that they are paired.
4. If Pairing is not completed within 2 minutes, the units will return to Standby and you can try pairing
again.
PRESS BUTTON(S)
and
and
flash every 3 seconds).
BLUE
FLASHING LED COLOR
RED
BLUE
PURPLE
PURPLE
| 11