Charging The Battery; General Functions - Terrano -X Manual De Usuario

CHARGING THE BATTERY

Use the USB cable to charge the unit for at least 3 hours before initial use.
RED
While charging, the
LED will turn off.

GENERAL FUNCTIONS

Press
Power ON/ OFF
• ON: 3
Volume
Tap
Mute
Tap
Press
Battery Check
• Blue
Automatic volume adjustemnt according to ambient noise and riding speed.
Automatic Volume
Adjustment
In Standby, press
(Default: Enabled)
• Enabled:
Voice activation can be customized to make it more or less sensitive. Voice activation for
Intercom calls can also be turned OFF.
You can choose between 'Regular' and 'High' sensitivity. If you experience difficulties starting
a conversation, change the setting to 'High':
Voice Activation
In Standby, press
(Default: Regular)
LED turns on. When charging is complete, the
for 2 seconds
BLUE flashes, Ascending tone
or to adjust and set volume of current audio source
and simultaneously
for 2 seconds and check the LED color:
= Full charge • PURPLE
for 5 seconds
BLUE flash for 2 seconds
and simultaneously for 2 seconds.
• Regular: BLUE
flash for 2 seconds
• High: PURPLE flash for 2 seconds
• Off: RED flash for 2 seconds
Channel "B" /
Channel "D"
Channel "A" / Channel "C"
• OFF: 3 RED flashes, Descending tone
= Half charge • RED = Almost empty
• Disabled: RED flash for 2 seconds
The TERRANO-X is waterproof
and dustproof. However,
when in use, the silicon cover
should be kept tightly closed
to prevent moisture from
entering the unit.
| 3