Key Functions; Switching On/Off; Setting The Volume; Programme Selection - Disney MD40518 Manual Del Usuario

K
EY FUNCTIONS

Switching on/off

• Press the POWER switch on the device to switch it to standby mode. The standby indica-
tor will light up.
• Press the button on the remote control to turn on the set. The standby indication will go
out.
When turned off at the POWER switch, the last used settings are stored. If the ap-
pliance is turned off while in standby mode, it returns to standby mode when next swit-
ched on via the POWER key. If turned off while showing a programme from a particular
station, it will show that same station when next switched on by pressing POWER.
When in standby, the set can be switched on by pressing a programme select button on the
set or on the remote control.

Setting the volume

• Press the or
• To turn the sound off completely, press MUTE.
• Press MUTE again or a volume button to turn the sound back on.

Programme selection

• The programme selection keys can be used to select any one of the stored pro-
grammes.
• The number keys can be used to enter the programme number directly:
– for a one-digit programme number, simply enter the required number;
the sign for a second digit will disappear from the screen after a few
seconds,
– for a two-digit programme number, enter the two digits one after the
other without a long pause between them.
Programmes on which the SKIP button was used (see below) can only selected with
the number keys.
• The INFO button displays the number of the current programme on the screen.
Press INFO again to turn off the programme number display..
GB-10
button to turn the volume up or down.