Key Functions; Switching On/Off; Setting The Volume; Programme Selection - Disney TV-Princess Manual Del Usuario

Disney-TV-Princess_MD3723-22.book Seite 10 Montag, 14. Juni 2004 4:33 16
K
EY FUNCTIONS

Switching on/off

• Press the POWER switch on the device to switch it to standby mode. The standby indicator will
light up.
• Press the button on the remote control to turn on the set. The standby indication will go out.
When turned off at the POWER switch, the last used settings are stored. If the appliance is
turned off while in standby mode, it returns to standby mode when next switched on via the
POWER key. If turned off while showing a programme from a particular station, it will show
that same station when next switched on by pressing POWER.
When in standby, the set can be switched on by pressing a programme select button on the set or
on the remote control.

Setting the volume

• Press the or
• To turn the sound off completely, press MUTE.
• Press MUTE again or a volume button to turn the sound back on.

Programme selection

• The programme selection keys can be used to select any one of the stored program-
mes.
• The number keys can be used to enter the programme number directly:
– for a one-digit programme number, simply enter the required number; the
sign for a second digit will disappear from the screen after a few seconds,
– for a two-digit programme number, enter the two digits one after the
other without a long pause between them.
Programmes on which the SKIP button was used (see below) can only
selected with the number keys.
• The INFO button displays the number of the current programme on the screen.
Press INFO again to turn off the programme number display..
• The QUICK VIEW button can be used to switch back and forth between the cur-
rent programme and the one previously selected.
GB-10
button to turn the volume up or down.