Cascade Installation - Fagor HTT 101 Manual De Instrucciones

1. Mount and tighten the screws and
plugs to secure the unit to the wall.
Left 10 cm of free space around from
each unit.
2. Connect the signal input in the respective connectors. The signal source can be from a
surveillance monitor, DVD, set-top box, CCTV and etc.
3. Optionally, connect the
loop-through RF input
coaxial cable.
4. Connect cable to RF output to
STB/TV.
5. Power supply connection: a) Connect the earth cable; b) Connect the power plug to the
unit mains connector; c) Connect the power plug to the mains socket.

Cascade Installation

HTT Home unit has 1 TV signal to RF output encoded as DVB-T Digital TV signal.
Several HTT Home units can be
cascaded in order to increase the
capacity. To cascade 2 or more units,
connect the RF output of the
preceding unit to the TV input
(loop-through) of the next unit (see
right illustration).
15