ETI Solid State Lighting 54140261 Manual Del Usaurio página 3

Installation
2. Installation
DANGER - RISK OF ELECTRIC SHOCK-DISCONNECT POWER TO LIGHT FIXTURE BEFORE INSTALLATION.
To replace uorescent tube lamp with LED tube lamp, the wiring must be installed according to these instructions to
ensure a complete and safe installation of the LED tube lamp.
Note: This lamp only operates on electronic ballasts. If lamp does not light when the luminaire is energized, remove
lamp from luminaire and contact manufacturer or quali ed electrician. This lamp cannot replace inductive ballast
type uorescent lamps directly.
2.1 Turn off the power to the light xture before installation.
2.2. Remove existing uorescent lamps. Please dispose or recycle these items properly in accordance with local
requirements as they contain mercury.
2.3. Install the LED T8 Tube lamp as per following wiring diagram.
Integral LED Tube Lamp Wiring Diagram
The Americas Headquarters
720 Corporate Woods Parkway
Vernon Hills, IL 60061
ETi SSL LED Lamp
Electronic Ballast
3
White
Black
Please contact 1-855-384-7754 for further assistance.
www.etissl.com