Use Of Accessories - Becker GV 1,8 M PLUS - IVP M GOLD Instrucciones Para El Uso

Proceed as follows:
- Open hatch A, insert the rapid snap-
on attachment B of the flexible hose
into the machine connection, and push
in as far as possible.
- To disconnect the flexible hose, open
hatch A, press the release button C
and extract the hose.
To connect the various components to each other, the end male attachment of the required component is inserted
into the female housing of the other component to be used, then the blocking ring nut D is rotated.
The gun can be connected to one of the extension rods, or used directly attached to the accessory.
The gun handle has the following commands:
- Button A: when this is pressed in, the gun will distribute the steam if buttons D are in position
- Button B: if pressed, it activates detergent supply.
- Switch C: start-up switch for vacuum.
USER'S INSTRUCTIONS
CONNECTION TO FLEXIBLE HOSE
Hose connection

USE OF ACCESSORIES

SPRAY GUN USE
VAC
M
15
VAC
M
Hose release system
.