Noise Emission - Becker GV 1,8 M PLUS - IVP M GOLD Instrucciones Para El Uso

In compliance with EC laws, or with the regulations in force in the User's Country, the User must arrange for the demolition,
disposal and elimination of the different materials composing the machine.
In case the machine - or any of its component - must be scrapped, it is necessary to adopt all the safety measures in order
to avoid any risks deriving from the dismantling of industrial machinery.
A particular care must be taken during the following phases:
- Disassembling of the machine from the working area
- Transport and handling of the machine
- Dismantling of the machine
- Separation of the different materials composing the machine.
To demolish and dismantle the machine, it is necessary to observe some important rules for the safeguard of one's health
and of environment where we live:
Eliminate any residue of oil and grease from the machine; the lubricating substances must not be dispersed
in the environment, but regenerated or treated by a Company specialised in the dismantling or such
products.
In case the materials used for the productive process or the lubricants and the condensation waters are not eliminated
according to the Laws and Regulations in force, there can be other additional risks such as:
1) Environmental pollution.
2) Intoxication of the people in charge of the dismantling operations.
Refer to the National or Regional Laws relevant to the elimination of industrial solid wastes and toxic and noxious wastes,
when carrying out the separating, recycling or dismantling operations of the materials:
Sheaths, flexible pipes and plastic or non metallic components, must be disassembled and dismantled separately;
Pneumatic and electric components such as valves, solenoid valves, pressure regulators, switches, transformers , etc .,
must be disassembled to be used again, in case they are still in good conditions or, if possible, overhauled and recycled.
The housing and in any case all the metallic parts of the machine must be disassembled and grouped according to each
type of material. The various parts, thus obtained, can be demolished and melted, in order to recycle the material composing
the original machine.
Noxious-toxic products must be eliminated in compliance with the National or Regional Laws in force,
through special draining channels belonging to the Consortium specialised in the elimination of used oils.
As owner of an electrical or electronic product, you are not allowed by law (according to EU-Directive
2002/96/EC of 27 January 2003 on waste electrical and electronic equipment and the particular national
laws of the EU-Member States transforming this Directive) to dispose of this product or its electrical/electronic
accessories as unsorted domestic waste. You shall use the designated gratis possibilities for return instead.
Noise emission readings for the generator during the steam discharging phase and with the vacuum in operation are equal
to 89 dBA, understood as an equivalent level (Leq).
During the machine's operation, it is recommended to wear suitable acoustic protection devices (earplugs, ear-muffs).
USER'S INSTRUCTIONS
MACHINE DISMANTLING

NOISE EMISSION

18