Operating Elements - Olympia CC 202 Manual De Instrucciones

Operating Elements

1 2 3
3
PRINT Print the result
1
-1 Reduce the set value by 1
2
+10 Increase the set value by 10
3
BAT Batch function / Define the capacity
4
SET Set display of the count results / Define
5
settings
CLEAR Reset the count results
6
START/STOP Start/Stop the counting process /
7
Confirm settings
Display
8 9 10
4
8 Display of the count results
9 Display of the respective coin value
10 Individual count result of the adjacent coin value
11 Total quantity of coins / Total value of coins
Operation
Switching on/off
The coin counter is switched on and off using the switch
on the rear of the machine.
8
6
4 5
11
1 On
2 Off
Self-Test
After switching the machine on, it performs a self-test.
Switch the machine on.
888888
appears in the display.
If the machine will not be used for a longer period,
7
disconnect it from the power outlet.
If an error occurs, refer to the "Self-Diagnosis" table.
Trays/Tubes
Before you start counting and sorting the Euro coins,
define whether trays or tubes are installed in the ma­
chine . Trays and tubes have different capacities.
The machine is supplied with trays installed; tubes
are optional accessories available from our Service
Center.
Capacity of the trays / tubes
Coin value (€)
0.01
0.02
0.05
0.10
0.20
0.50
1.00
2.00
Changing the capacity value to trays or tubes
BAT
until 0.01 appears in the display [10] beside
300
. The capacity of all the trays is displayed.
START/STOP
or
2 x BAT
50
side . The capacity of all the tubes is displayed.
START/STOP
reselected. The machine is ready to operate.
Inserting coins
Insert the coins to be counted at the top of the funnel.
G
1
2
A self-test is completed,
Capacity
Trays
300
200
200
150
150
150
100
70
The machine is ready to operate.
until 0.01 appears in the display [10] be­
The collector last selected is
Tubes
50
50
50
40
40
40
25
25