Olympia CC 202 Manual De Instrucciones página 9

CAUTION!
• Risk of injury
Fingers and hands could be injured.
Do not reach into the funnel.
Keep fingers and hands well away from the
infeed mechanism.
ATTENTION!
• Risk of property damage!
Do not insert coins which do not comply with
the intended use or foreign bodies into the coin
counter.
START/STOP
START/STOP
Functions
Display of the count results
The display [10] and display [11] together represent the
results of counting. Define whether you want the results
of counting the individual coin denominations as a
quantity or an amount and the total result in the display
[11] as a quantity or an amount.
SET , several times if necessary,
the count results changes and is also indicated in the dis­
play [8] (VALUE, QUAN.).
Display as a quantity is also indicated by a simply
X 0
. Display as an amount appears as a decimal
X 0 , 0 0
value .
Batch
This function causes counting to stop when the preset
quantity of coins has been counted.
The batch of coins to be counted can be set between
and the maximum capacity of the respective trays.
The maximum capacity is shown in the "Capacity, tray/
tube" table.
BAT
2 sec. The selected coin value flashes in
the display [10].
+10 / -1
until the required batch quantity is
set.
BAT
Set the next batch.
Repeat this process until all the coin values are set.
START/STOP
The setting process is completed.
Insert the coins for the count/sort process using the
Batch function.
START/STOP
When the set number of a specific coin denomina­
tion has been reached, the count/sort process
Start the counting process.
Stop the counting process.
The display of
Start the count/sort process.
stops and the corresponding coin denomination flashes
in the display. Empty the tray.
START/STOP
When the count/sort process has finished, the result
appears in the display for the total and for the individual
coin denominations.
Press the CLEAR button before beginning a new
counting process.
Connections
The coin counter is equipped with two connections.
1 Power
2 Printer / Computer (RS-232)
Printing the Count Results
Connect a printer or computer to the coin counter at the
RS-232 port and start the counting process.
After the counting process:
SET
2 sec.
SET until the required setting is selected.
PRINT
The count results are printed out on the
printer or PC connected.
1
G
Continue counting.
1
2
Prt PC
or appears in the display.
9