Victron energy VE.Net Blue BPP2 Manual De Instrucciones página 21

To configure the generator overview, set the VGM that will be used in
the "Generator" menu.
Generator menu
Item
Select Select the generator module that will be used for the Select the generator module that will be used for the
VGM generator overview.
4.3.3 The custom overview
The custom overview allows you to select which information is
displayed, and how it is presented.
A
To configure the custom overview, you must first
decide which information will be displayed, and
where. Once this decision has been made, set the
appropriate values for the properties of each
indicator in the "Custom" menu. The numbers of
the property names in this menu refer to the
location at which the indicator will be displayed, as shown in the diagram location at which the indicator will be displayed, as shown in the diagram
on the right.
Custom menu
Item
x style The indicator style to use for this indicator (see chapter The indicator style to use for this indicator (see chapter
5.3 for more information).
x device
The VE.Net device that will provide the property for this The VE.Net device that will provide the proper
indicator.
x property The property that will provide the value for this indicator. The property that will provide the value for this indicator.
x title The text to appear in the title for this indicator. The text to appear in the title for this indicator.
Description
allows you to select which information is
Description
that will be used in
Item Description
A
Indicator titles. Indicator titles.
Indicator icons Indicator icons
B
B
and values. and values.
The icons used for the The icons used for the
indicators are tors are
described in detail in described in detail in
chapter 5.3 5.3.
15