Osd Initial Language Setting - Optional; Initial Setting The Area Code; Adjust The General Settings - LG MDS714 Manual De Usuario

OSD Initial language settings - Optional
During the first use of this unit, the initial language setup menu
appears on your TV screen. You must complete initial language selec-
tion before using the unit. English will be selected as the initial lan-
guage.
1 Turn the power on
The language list appears
2 Select the language
3 Press
4 To confirm press

Initial Setting the Area Code

When you use this unit for the first time, you have to set the Area
Code as shown below.
1 Display setup menu
2 Select LOCK menu on the first level
3 Move to second level
The activated Area Code appears on the
second level.
4 Move to the third level
5 Enter a new password
6 Recheck the entered new password
7 Select a code for a geographic area
After select, Rating and Password will be
activated. (page 19)
8 To confirm what you press
Make sure to finish setting the Area Code
before leaving the setup menu if you cannot
set the rating and Password
8

Adjust the general settings

1 Display setup menu
2 Select a desired option on the first level
3 Move to second level
ON REMOTE
4 Select a desired option on the second level
POWER
5 Move to third level
U u I i
6 Change the setting
ENTER
I i and ENTER
Adjust the general settings - More you can do
Adjust the language settings
OSD – Selects a language for the Setup menu and on-screen display.
Disc Audio/ Disc Subtitle/ Disc Menu – Selects a language for the Audio/ Menu/
ON REMOTE
[Original]: Refers to the original language in which the disc was recorded.
SETUP [Others]: To select another language, press number buttons then ENTER to
U u
[OFF] (for Disc Subtitle): Turn off Subtitle.
i
i
numerical buttons
(0-9) and ENTER
numerical buttons
(0-9) and ENTER
U u I i and
ENTER
ENTER
Subtitle.
enter the corresponding 4-digit number according to the language
code list in the reference chapter.
Refer to the language code on Page 19.
ON REMOTE
SETUP
U u
i
U u
i
U u and
ENTER