THOMSON DS205 Modo De Empleo página 16

Play
Play a disc
1. Press SOURCE repeatedly to select DISC source.
2. Insert a disc with the printed side facing upward.
3. Play starts automatically, if not, Press
4. Press the VOL+/VOL– to adjust the volume.
Pause / resume play
1. During play, press
2. During play, long press
Skip to a track
For CD:
1. Press / to select another track.
2. Press the VOL+/VOL – to adjust the volume.
For MP3 disc and USB:
1. Press / to select a track or a file.
2. Press the VOL+/VOL – to adjust the volume.
Search within a track
1. During play, press and hold
2. Release to resume normal play.
Listening to radio
You can program a maximum of 20 preset radio stations (FM).
1. Press the SOURCE button to select RADIO mode. The unit will be in FM radio mode.
2. Press / to search radio station.
3. Select the desired radio station by pressing the
4. Once you find a station you want to save, press the MEM button on the remote control, "P01" will
be shown on the display, press MEM+/MEM- until the desired memory position number appears
on the display. Press the MEM again to confirm and save the current station.
5. (Auto) Press and hole MEM button, The unit will automatically start and search the frequencies,
all available stations are programmed in the order of waveband reception strength, the first
programmed radio station is broadcast automatically.
Play from external audio
You can play from an external audio device such as MP3 player through this unit.
Line in Jack (Requires a 3.5mm cable)
1. Connect a 3.5mm cable to the Line jack on top panel. Connect the other end of the 3.5mm cable
to an Mp3 player or other audio device.
2. Press the button to turn the unit on.
3. Press the SOURCE button to switch to Line In mode.
4. Use the controls on the connected device to begin playing audio routed through the unit.
Auxiliary Input RCA (Requires an RCA cable)
1. Connect an RCA cable to the Auxiliary Input. Connect the other end of the RCA cable to the audio
output on your DVD player, stereo system, gaming system or television.
2. Press the power button to turn the unit on.
3. Press the SOURCE button to switch to Aux In mode.
4. Use the controls on the connected device to begin playing audio routed through the unit.
.
to pause/resume play.
/ button to fast forward/fast rewind.
/ .
- EN 6 -
/ button.