English
The frame
Unfold the frame (a, b)
· Keep children away from all moving
parts when unfolding.
· Press the unfolding safeguard inwards
(a1) and lift the upper frame up until
the lower support clicks into place.
Move the push-bar backwards until you
hear a second click. (b)
· Before use always check that the pram
has been unfolded and secured correctly.
Fold the frame (c,d)
· Stand behind the frame and put the
frame on the brake. Put the height ad-
justment buttons (c1) of the push bar
in the lowest position. Pull the release
buttons of the upper frame (c2) to-
wards you on both sides and turn the
push bar forwards until the push bar is
on the lower support. (c3)
· Pinch the lower frame unlocking but-
tons and fold the frame. (d)
· The folding safeguard locks automati-
cally when the product is folded up.
· You can carry the frame from the push
bar when the unfolding safeguard has
been locked.
The wheels
Assemble the rear wheels (e)
· Slide the axle of the rear wheel in the
rear wheel casing until you hear a click.
· Pull the wheel to check that it has been
attached firmly.
Disassemble the rear wheels (f)
· Press the button at the back side of the
rear wheel casing and take the wheel
off the frame
Assemble the front wheels (g)
· Slide the axle of the front wheel up-
wards in the front wheel casing until
you hear a click.
6
· Pull the wheel to check that it has been
attached firmly.
Disassemble the front wheels (g)
· Push the button on the back side of the
front wheel (g1) and pull the wheel
from the front wheel casing. (g2)
The swivelling wheels (h)
· Turn the ring above the front wheel out-
wards on both sides in order to block
the swivel setting. The swivelling wheels
will automatically be locked when the
wheels are placed in forward direction.
· Turn the ring above the front wheel on
both sides inwards to unlock the swivel-
ling wheels.
The brake (i)
· Push the brake pedal downwards with
your foot to block the rear wheels.
· Push the brake pedal upwards with
your foot to unblock the rear wheels.
The push bar (j)
· The push bar has three different height
positions. Press the height adjustment
buttons (j1) and move the push-bar
higher or lower while keeping the but-
tons depressed.
· Release the button when the push bar
is in the desired position.
The pushchair seat (0 months up to 55 lbs.)
· The pushchair seat is suitable for chil-
dren from 0 months and upwards, up to
55 lbs (25kg).The seat can be folded up
and unfolded along with the frame. The
back support and leg support are adjust-
able. Make sure that the frame has been
fully unfolded and the brake is blocked
during all actions indicated below.
Adjust the back support (m)
· The button for adjusting the back support