Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
11. ISDB-T Operation
11. ISDB-T Operation
Press (TV mode
) on the Main Menu screen to enter the TV mode.
1.
Displays the current Channel info.
2.
Current info, time, signal
3.
Language switch
4.
TV program information Browse
5.
Preset TV channel, click to choose TV channel.
6.
Exit TV, go to MAIN MENU
7.
Open/close voice output
8.
Caption is to control to show the caption
Search channel
SEARCH: Automatic Channel Scan, pressing the button, "Scan"start channel scan to find out
available broadcasting channels in the area. It will take from 30sec to 3min depending on the
signal condition.
Subtitle
Click the icon [Caption]
- CAPTION: press "SUB" button, Caption(Subtitle) function shall be enabled.
- Press again the button shall disable the Caption function.
- The Caption function can not be displayed if the program does not support it.
EPG (Electric Program Guide)
44
9.
Zoom in/out Button
10.
Automatic Channel Scan
11.
The Program Guide displays.
12.
Preferences setting; set the language/Video/Audio/
other.
13.
In manual tuning upward or downward search Channel
14.
Volume control
15.
Into the channel menu list
11. ISDB-T Operation
- On pressing "EPG", you can see the program guide. Selecting any program, it will show its
Program Information.
- When the broadcaster does not carry the EPG data in the program, this function will not work properly.
Channels List
Press"Channel" to return into menu interface The
Channel list as below:
Press
into the channels list interface
System Setting
Click the icon [Setting]
Option
1.
Audio is to exchange stereo and mono
2.
Multi-audio is to exchange the left and right
channels
3.
Caption is to control to show the caption or not(the
basic is that TS support the caption)
4.
Language is to choose different country language.
Display
1.
Screen is to exchange the frame into elongated,
wide and normal
2.
Brightness is to adjust the brightness of the screen
3.
Contrast is to adjust the contrast of the screen
4.
Saturation is to adjust the screen saturation.
System
1.
Factory reset is original setting
2.
Version info is about the product version
information
Note:
1. Press
2. Press
into the channels list interface
into EPG interface
45
Publicidad
Tabla de contenido
