Solid / Liquid Density Measurement; Test Solid Material Density - Gram FD Serie Manual De Utilización

4. Place the simple object in the container.
5. Print the weight value pressing the

SOLID / LIqUID DENSITy MEASUREMENT

Applied formula:
Sample density = Weight in the air / (Weight in the air – Weight in the liquid)
* Liquid density

Test solid material density

Because the buoyancy of the liquid density depends on the temperature,
temperature varies 1ºC, the density of distilled water will change 0.02%.
In order to modify the effect of temperature on density, please set the
temperature refer to function setting section:
Step
1 Preheat the balance for 30 min
2 Tare the balance
3 Set sample state (solid)
14
Procedure (Example)
key.
Key / Instruction Display
0.000g
CEnTIg
ShaPE
SOLID
0.000g