Safety Check; Troubleshooting - Gram FD Serie Manual De Utilización

Note:
After remove the weighing pan and the pan support, avoid any liquid or solid
pellet into the installation hole.

Safety check

If the balance could not work normally:
• Cut off the power immediatelly, keep and do not use it again.
• Keep it in a safe place to make sure it won´t be used for the moment.
• Inform the nearest Service Center or your Distributor. The repairman
must have had profesional training.

TROUbLEShOOTINg

DISPLAy
- - - - - -
hhhhh
LLLLLLL
26
REASON
The balance could not get
a stable reading or the
transducer is damaged.
The real weight is 5% higher
than its capacity or the
transducer is damaged.
a) The weighing pan is not on.
b) There is wrong connect with
the pan.
c) The transducer is damaged.
SOLUTION
Contact your local service
center.
Unload or contact your local
service center.
a) Install the right weighing
pan and press the
b) Clear the connect.
c) Contact your local service
center.
key.