Media Parameters Setup; Additional Functions - Gram FD Serie Manual De Utilización

please continue to step (4).
key, "LIqUID" displays, then press
4. Press

MEDIA PARAMETERS SETUP

key, "CEnTIg" displays.
1. Press
key repeatedly till "COEFF" displays.
2. Press
3. Press key, the parameters set last time displays, for example: 1.
4. Press key, "SET dP." displays, press
point, then press
density value, or press
Remarks:
a. Set up liquid media's parameter as 1 (distilled water) while measuring
solid's density;
b. When measuring liquid's density, user can choose weight as the
measuring solid, measure its density first, then input density value,
test the liquid's density with the solid you chose).
5. After adjusting density value, press
then press

ADDITIONAL FUNCTIONS

bottom hook weighing
There is a hole at the bottom of the balance for the optional weighing hook (It
is not allowed tyo use the bottom part to balance in Legal Metrology)
key for confirmation. Press
key for increasing.
key for confirmation, Media Parameters Setup is over.
key for confirmation.
key to move decimal
key to reduce
key, the density value flickers,
21