Restoring Factory Setup; Backlight Setup - Gram FD Serie Manual De Utilización

3. Press key to enter into Baud Rate Setup Menu, "300" displayed.
4. Press key repeatedly till the baud rate you want displays, then press
key for confirmation, after "PArITy" displays, set up Parity Check.
key for choosing Parity Check, balance first displays "nOnE"
5. Press
(no check).
key for checking choice, "Odd" means odd number check,
6. Press
"EvEn" means even number check.
7. Press key for confirming proper checking type, then back to normal
weighing mode.

RESTORINg FACTORy SETUP

1. Press key for entering into menu of the balance, "PrInt" displays.
2. Press key repeatedly till "InITIA" displays.
key for confirmation, after the balance displays "bUSy", back
3. Press
to normal weighing mode, Restoring Factory Setup is over.

bACKLIghT SETUP

1. Press key for entering into menu of the balance, "PrInt" displays.
key repeatedly till "bLghT" displays, press
2. Press
confirmation, balance displays "1 nIn".
3. Press key repeatedly to choose backlight time (1, 2, 3, 5, 10, 15, 30,
60 are options, means backlight turns off time range is 1-60 minutes).
key for
19