JB Systems Light LED Moon Manual De Instrucciones página 6

ENGLISH
OPERATING INSTRUCTIONS
 Connect the unit to the mains by using the supplied power adapter.
 The unit will start working
 Select the desired operating mode by turning the operation knob (4)
o
Stationary mode: the light beams will be static
o
Auto rotating: the light beams will rotate at a constant speed
o
Sound Activated: the light beams will rotate in different direction to the rhythm of the music
 Do not switch the unit on and off in short time intervals
 Always unplug the unit when it is not used for a longer time or before to start servicing.
 In the event of serious operating problems, stop using the fixture and contact your dealer immediately.
 Important: Never look directly into the light source! Don't use the effect in the presence of persons
suffering from epilepsy.
MAINTENANCE
 Make sure the area below the installation place is free from unwanted persons during servicing.
 Switch off the unit, unplug the mains cable and wait until the unit has been cooled down.
During inspection the following points should be checked:
 All screws used for installing the device and any of its parts should be tightly fastened and may not be
corroded.
 Housings, fixations and installations spots (ceiling, truss, suspensions) should be totally free from any
deformation.
 When an optical lens is visibly damaged due to cracks or deep scratches, it must be replaced.
 The mains cables must be in impeccable condition and should be replaced immediately when even a
small problem is detected.
 In order to protect the device from overheat the cooling fans (if any) and ventilation openings should be
cleaned monthly.
 The interior of the device should be cleaned annually using a vacuum cleaner or air-jet.
 The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to
optimize light output. Cleaning frequency depends on the environment in which the fixture operates: damp,
smoky or particularly dirty surroundings can cause greater accumulation of dirt on the unit's optics.
Attention: We strongly recommend internal cleaning to be carried out by qualified personnel!
SPECIFICATIONS
Mains Adapter:
Power consumption:
Sound Control:
Lamp:
Size:
Weight:
You can download the latest version of this user manual on our website: www.beglec.com
JB SYSTEMS
®
Every information is subject to change without prior notice
input: AC 100~240V, 50/60Hz
Output: 6Vdc / 1.6A
10 Watt
Internal microphone
3 Watt Led
195 x 165 x 134mm
0,6 kg
4/29
OPERATION MANUAL
LED MOON