ALFRA KFH 150 Instrucciones De Operación página 15

12.0 ALFRA – Carbide Deburring End
These solid carbide end mills were especially developed for perfect deburring tasks.

Solid carbide End Mill (similar to DIN 6527)

Precision type shank -Ø 8 mm

Total length 60 mm
Description
Carbide End Mills Ø 8 mm, 4 cutting edges,
coated
Universal use at steel and stainless steel;
up to bevel width of 5mm.
Suitable for wide bevels (up to 7 mm) at soft
materials i.e. aluminum, brass, plastic, wood.
Carbide End Mills Ø 8 mm, 4 cutting edges –
rought toothing, coated
Universal use at steel (St37 – St42),
KFH 150: up to bevel width 5 mm
KFT 250: up to bevel width 7 mm
This type is also suitable for the preparation of
welding edges. (Not suitable for stainless steel).
Mill for special tasks and radius mills R 1,5 – 2,0 – 2,5 on request.
(Mill recommendation date August 2009)
13.0 Guarantee
For our ALFRA Bevelling and Deburring Machines we grant guarantee according to the legal and
regional regulations (proven by invoice).
If the electric tool is modified without our authorization, this declaration will
lose its validity and the guarantee expires.
Mills
End Mill Prod.-No.
25150
25154
15