Cleaning And Maintenance - BaBylissPro Marcel BAB2241TDE Manual De Usuario

longer than about 72 minutes, the
auto shutoff will turn the unit off;
this option increases the life of the
barrels and provides greater safety.
WARNING
The barrel becomes very hot in a
few seconds and should not touch
the skin once the wand is plugged
in. This iron becomes extremely
hot when it is set to the highest
temperature. Always test on a curl
to make sure the setting is appro-
priate for the hair.
The temperature selector lets you
set the exact temperature desired
(30 settings).
For fine hair, use a lower tempera-
ture to get the best results and to
respect the hair's integrity per-
fectly.
For thick, wavy or hard to curl hair,
use a higher temperature for best
results.
Heat setting
1-5
5-10
10-15
15-20
20-25
25-30
TEMPERATURE CONTROL GUIDE
Hair type
damaged
coloured
thin
medium
thick
wavy, afro
Features
• Titanium Diamond Technology
• 30 temperature settings from
135°C to 220°C
• On/off switch
• Auto shut off after 72 min
• Rotating mobile handle
• Rotating fixed handle with lock/
unlock switch
• Built-in metallic stand
• Thermal styling finger glove
• 2.7 m professional swivel power
cord

CLEANING AND MAINTENANCE

Before removing any hair-product
residues left on the wand check
that the iron is turned off and un-
plugged and that it has cooled.
Clean the iron using a damp cloth
and non-corrosive detergent or
soap. Before using again, check
that the appliance is dry.
5
Temperature °C
135°C - 140°C
140°C - 155°C
155°C - 170°C
170°C - 185°C
185°C - 200°C
200°C - 220°C