Fastening The Prism; Setting Up The Clamping Position; Mounting The Reamer - Binzel BRS-LC Instructivo De Servicio

Estación de limpieza de la antorcha
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

7 Transport and installation

7.3 Fastening the prism

1
Clamping device
Fig. 5
Fastening the prism
1 Insert the prism (2) into the clamping device (1) from above.
2 Screw in the cylinder head screw (3).

7.4 Setting up the clamping position

1
Gas nozzle
Fig. 6
Setting up the clamping position
 See also Fig. 4 Putting into operation on page EN-11
1 Move the torch with the gas nozzle (1) vertically to the tool axis (reamer axis) over the BRS-LC (3) P1 Fig. 4).
2 Approach the clamping position P2 (Fig. 4). Make sure that the cylindrical part of the gas nozzle (1) lies evenly against
the prism (2).

7.5 Mounting the reamer

1
Clamping device
Fig. 7
Mounting the reamer
EN - 12
1
2
Prism
1
2
Prism
1
eamer
2
R
2
3
3
Cylinder head screw
2
3
3
Maintenance station BRS-LC
2
3
3
Tool
BAL.0030 • 2019-01-18
BRS-LC

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido