Cleaning And Maintenance - Caso WK2500 Manual Del Usuario

Please note
► When the water kettle is not positioned on the base, "E" is shown in the display.
4. Close the lid and place the water kettle onto the base.
5. The current water temperature is shown in the display.
6. Press the button. The device beeps one time and the button lights up.
7. If no button is pressed within 3 seconds, the current water temperature is shown again.
8. Choose a temperature by pressing the
by a point in the display.
Please note
► The device beeps every time you press a button.
9. You can regulate the default temperatures 40 / 70 / 80 / 90 / 95 / 99°C with the buttons
"+" and "-".
10. Temperature regulation:
- Temperature regulation between 35°C and 45°C increases/decreases by 1°C
- Temperature regulation from 40°C to 99°C increases/decreases by 5°C
11. When you have chosen a temperature, press the
lights up red. The
12. During the process of water cooking the current temperature is shown in the display.
When the water is cooked, the device beeps three times. The
13. Activating keep warm mode:
- Press the button again. The button lights up blue.
- Choose a temperature (see above).
- When you have chosen a temperature, the device beeps three times.
- The water will be kept warm for 2 hours.
14. Turning off the device:
- Press and hold the
- The device stops and turns into standby mode.
- Press any button to turn on the device again.
Please note
► If no buton is pressed within 15 min, the device automatically turns into stand by mode.
► In keep warm mode the display does not switch off.

15 Cleaning and Maintenance

This chapter provides you with important notices with regard to cleaning and maintaining
the device. Please observe the notices to prevent damages due to cleaning the device
incorrectly and to ensure trouble-free operation.
Caso Wasserkocher WK2500
button switches off.
button for approx. 4 seconds.
button. The chosen temperature is indicated
button one time.The button
button switches off.
28