Mounting A Monopod - Greenlee G1 Versi-Tugger Operación Manual

Optional: Mounting a Monopod
1. Cut a piece of 1/2" EMT conduit to desired length.
2. Insert the conduit into the monopod adapter.
3. Loosen the wing screw until the conduit fully seats
into the bottom of the monopod adapter.
4. Tighten the wing screw until the conduit is held
securely by the wing screw.
* Take care when tightening the wing screw,
overtightening can result in stripping the threads
in the monopod adapter.
Greenlee Tools, Inc.
Wing Screw
16
G1 Versi-Tugger™
Monopod Adapter
1/2" EMT Conduit
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070