Blaupunkt ISD-RG1200 Manual De Usuario página 4

English
Note:
• Please note that whenever the device gets plugged ON it will be armed automatically.
Press the ON/OFF button to disarm the device. The ARM indicator LED will turn off.
•
Connect the round plug of the mains adapter to the 12 V/DC 1 A connection socket
(6).
•
Once the unit has been connected to the mains supply, the POWER LED indicator and
ARM LED indicator (10) light up. The device is turned ON and in is ARM mode.
Optional: Insert 8x 1.5 V AA batteries (not included) into the battery compartment (5). Observe
correct polarity (+/-) as indicated in the battery compartment. Close the battery compartment.
We do not recommend the use of rechargeable batteries, since those have a lower voltage.
Note:
•
Radar Guard batteries are intended for use as backup batteries (backup power
supply), in case the supply through the mains adapter gets disconnected or fails.
Do not consider batteries as a main power supply. The main unit must be connected
to the provided mains adapter during use.
•
In case of power failure, the lifespan of the batteries can last for up to one week, as
long as the device does not activate the alarm periodically. Periodically activating
the alarm can cause the batteries to be exhausted after one day or even faster.
•
Replace the batteries, once the POWER indicator lamp gets weaker or turns off.
•
Remove the batteries when not using the device for a longer period of time.
3