Blaupunkt ISD-RG1200 Manual De Usuario página 6

English
•
Do not install the system where it will be exposed to direct sunlight or rain (for indoor
use only).
•
The unit should be away from heat sources such as radiators, heating ducts and stoves.
•
If the device launch a false alarm it is might be located too close to a heat source,
changing the location or direction of the unit can remedy this.
•
Only use the supplied mains adapter as a power supply.
•
The system sound is very loud, never put the unit close to your ear.
•
For safety reasons, disconnect the power adapter from the mains socket during storms.
•
If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
6 – Technical specifications
ISD-RG1200
Input voltage / current.......................................... 12 V/DC, 1 A via power adapter
Backup battery..................................................... 8 x 1.5 V battery type AA
Power consumption............................................. ≤ 6 W
Standby current consumption.............................. ≤ 7 mA
Dynamic current consumption............................. ≤ 500 mA
Noise level range..................................................≤ 95 dB
Doorbell noise level range....................................70-95 dB
Dogs barking noise level range.............................65-95 dB
Alarm noise level range........................................ 75-95 dB
Transmission frequency/power............................ 5.8 GHz, 1 mW
Radar detection angle......................................... 360°
Radar detection range (open area) ..................... 0 – 15 m (rear), 0 – 3,5 m (front),
0 – 7 m (side)
Operating conditions............................................ 0 to +40 ºC, 20 % – 85 % RH
Storage conditions............................................... 0 to +40 ºC, 20 % – 50 % RH
Dimensions (W x H x D) ...................................... 154 x 160 x 110 m
Weight................................................................. Approx. 820 g
Power adapter
Input voltage / current.......................................... 100 – 240 V/AC, 50/60 Hz, max. 0.3 A
Output voltage / current....................................... 12 V/DC, 1 A
Cable length........................................................ 1.5 m
Remote control
Operating voltage................................................ 1 x 3 V button cell, type CR2032
Range (open area) .............................................. max. 60 m
Transmission frequency/power............................ 433 MHz, 0.1 mW
m
5