Calibration Data - SpotOn 35010 Instrucciones

NIST-TRACEABLE CERTIFICATE OF CALIBRATION
Innoquest, Inc.
910 Hobe Road
Woodstock, IL 60098
USA
Item No.
35010 SpotOn® Inversion Tester
Received Condition: As Left Condition:
New Unit
The above referenced instrument was calibrated by direct measurement of generated
temperatures using the reference standards listed in the "Test Equipment" table. The data
obtained are shown below. This calibration is traceable to NIST or natural physical constants
and is in compliance with the ISO 10012-1:1992(E) requirements.
TEST EQUIPMENT:
Instrument Model
Dry-Well Calibrator 9102S

CALIBRATION DATA:

Sensor Set-point Actual
Air 77.0 °F ______°F
Temperature
CALIBRATION DATE:_________________________________________________
PERFORMED BY:_____________________________________________________
27
Description: Serial No.
Calibration Range:
In Tolerance One Point: 77.0 °F (25 °C)
Serial No. Calibration Date
A28187 9 Feb. 2018
Error Calibration
Tolerance
______°F +/- 0.4 °F
Pass/Fail
Pass