BRONDI FX-400 Twin Manual De Instruccion página 10

5. Specifications
Channels Available
CTCSS Sub-channel
DCS Sub-channel
Output Power (TX)
Range
6. Channel Frequency Table
Channel
1
2
3
4
7. Safety
Do not use any FX-400 that has a damaged antenna. If a damaged antenna comes in contact
with the skin, a minor burn may result.
All batteries can cause property damage and/or bodily injury such as burns if conductive
material such as jewelry, keys, or beaded chains touches exposed terminals. The material
may complete an electrical circuit (short circuit) and become quite hot. Exercise care in
handling any charged battery, particularly when placing it inside a pocket, purse, or other
container with metal objects.
Do not place your FX-400 in the area over an air bag or in the air bag deployment area. Air
bags inflate with great force. If a FX-400 is placed in the air bag deployment area and the air
bag inflates, the FX-400 may be propelled with great force and cause serious injury to the
occupants of the vehicle.
Turn your FX-400 OFF when in any area with a potentially explosive atmosphere, unless it is a
type especially qualified for such use (for example, Factory Mutual Approved). Sparks in such
areas could cause an explosion or fire resulting in injury or even death.
Do not replace or charge batteries in a potentially explosive atmosphere. Contact sparking
may occur while installing or removing batteries and cause an explosion.
To avoid possible interference with blasting operations, turn your FX-400 OFF near electrical
8 Channels
38 for each Channel
83 for each channel
0.5 W
Up to 8 Km.
Frequency (MHz)
446.00625
446.01875
446.03125
446.04375
CAUTION
Damaged Antenna
Batteries
WARNING
For Vehicles with an Air Bag
Potentially Explosive Atmospheres
Batteries
Blasting Caps and Areas
Channel
5
6
7
8
- 10 -
Frequency (MHz)
446.05625
446.06875
446.08125
446.09375