Cover Removal And Replacement; Cushion Insert Removal And Replacement - Permobil ROHO Hybrid Elite Manual De Operación

Ocultar thumbs Ver también para ROHO Hybrid Elite:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14

Cover Removal and Replacement

Cover Removal:
1. Unzip the cover.
2. For Standard Covers Only: Open the cover flap. Reach inside the cover and pull the inflation
valve through the opening so that it is inside the cover. Repeat for other side.
3. Remove the cover from the cushion.
Cover Replacement:
Warning: Before replacing the cover, make sure the foam insert and the cushion
insert are correctly positioned and securely attached. See "Foam Insert Replacement
and Cushion Insert Replacement".
Standard Cover Instructions
1. Unzip the cover and with air cells facing up and
the non-skid surface of the cover facing down,
insert the cushion into the cover.
2. The back of the cushion should face the zipper.
3. Open the cover flap. Reach inside the cover
and push the inflation valve through the opening
beneath the cover flap. Close the cover flap.
Repeat for other side.
4. Zip the cover closed. If hook fastener strips were
removed prior to washing, replace the strips.

Cushion Insert Removal and Replacement

Cushion Insert Removal:
1. Remove the cover from the cushion. See "Cover Removal".
2. Slide the tubing out of the loop on the foam insert.
3. Remove the tubing from the groove in the foam base and gently pull
through the hole in the foam base corner. Repeat for other side.
4. Remove the cushion insert from the contoured foam base.
Cushion Insert Replacement:
1. Place the cushion insert on the foam base, lining up the hook and
loop fastener strips. Make sure the cushion insert is centered. Press
down to securely attach the cushion insert to the foam base.
2. Insert the tubing through the hole in the foam base corner.
Repeat for other side.
3. Slide the tubing through the loop on the foam insert and press the
tubing into the groove in the foam base. Repeat for other side.
4. Confirm correct positioning of the foam insert. See "Foam Insert
Replacement".
5. Replace the cover. See "Cover Replacement".
ROHO Hybrid Elite Cushion Operation Manual
6
Heavy Duty Cover Instructions
1. Unzip the cover and with air cells
facing up and the non-skid surface
of the cover facing down, insert the
cushion into the cover.
2. The front of the cushion should face
the zipper.
3. Tuck all of the tubing inside the cover.
4. Zip the cover closed. If hook fastener
strips were removed prior to washing,
replace the strips.

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido