Flip-Forward Back - Quantum TRU BALANCE 3 Instrucciones Básicas De Funcionamiento

Flip-forward Back (Optional)
The flip-forward back allows the user to flip the seatback forward
for easier transportation. See figure 5. Your seating system may be
equipped with one of two flip-forward backs.
To flip the seatback forward:
1. Remove the detent pin (see figure 6) OR rotate the release lever
on both back canes toward the rear of the seat to disengage the
back. See figure 7.
2. Fold the seatback down.
To return the seatback to an upright position:
1. Lift the seatback up and place in the upright position.
2. Reinstall the detent pin and ensure all components are secure (see
figure 6) OR rotate the release lever on both back canes toward the
front of the seat to latch the back canes. Ensure a red sticker on the
release lever is not visible. See figure 7.
WARNING! Ensure the detent pin is properly inserted OR the
release lever is properly latched before sitting in your power chair.
Figure 5. Flip-forward Back
(Disengaged)
Figure 7. Flip-forward Back (Release Lever)
Figure 6. Flip-forward Back
(Detent Pin)
Red Sticker
