Quantum TRU BALANCE 3 Instrucciones Básicas De Funcionamiento página 22


Top height adjustments do not require any tools. The top height
adjustment range is 1 in. (2.54 cm) in 3/8-in. (0.95-cm) increments. The
bottom height adjustment range is 2 in. (5.08 cm) in 1-in. (2.54-cm)
increments.
To adjust the top height:
1. If present, remove the optional locking pin. See figure 15.
2. Pull the armrest up to raise, or press the release lever to lower the
armrest to the desired height.
3. If applicable, reinsert the locking pin.
4. Repeat for the other armrest if necessary.
1. Locking Pin
2. Armrest Lever
Figure 15. Pediatric Single Post Quick Height Adjustment Armrest
Removal/Installation
To adjust the bottom height:
1. Remove screws 1 and 2 from the detent bar. See figure 16.
2. Slide the armrest up or down to the desired height.
3. Line up the holes in the armrest.
4. Reinstall screws 1 and 2 into the detent bar.
5. Repeat for the other armrest if necessary.
Identification Key
3. Armrest Block
1
2 3