Headrest Adjustment; Storage; Care And Maintenance - Quantum TRU BALANCE 3 Instrucciones Básicas De Funcionamiento

Headrest Adjustment

The headrest can be easily adjusted to different heights, depths, and
angles.
To adjust the height, depth, or angle of the headrest:
1. Loosen the adjustment screws that correspond to the desired
adjustments. See figure 25.
2. Adjust the headrest to the desired position.
3. Tighten the adjustment screws.
NOTE: Once adjustments have been made and the headrest is in
the desired position, make sure that all of the hardware is tight.
WARNING! Do not extend the overall headrest height more than 7 in.
(17.78 cm) above the headrest bracket.

Storage

Some of the parts of your power chair are susceptible to extreme
changes in temperature. Always keep your power chair between the
temperatures of 18°F (-8°C) and 122°F (50°C). It should be stored at
room temperature in a clean and dry location.

Care and Maintenance

Your mobility product must be disposed of according to applicable
local and national statutory regulations. Contact your local waste
disposal agency or Quantum Rehab Provider for information on proper
disposal of mobility product packaging, metal frame components,
plastic components, electronics, batteries, neoprene, silicone, and
polyurethane materials.
„ Make sure all hardware is secured properly, but do not overtighten
any hardware.
„ To clean the TRU-Balance® 3 seating system, wipe it with a cloth
dampened with mild soap and water. Thoroughly dry the unit before
using. To properly clean the TRU-Comfort 2 back cushion, follow the
cleaning instructions in the "TRU-Comfort 2" section of this manual.
