Char-Griller Flat Iron 8036 El Manual Del Propietario página 12

HARDWARE NEEDED
Assembly: Requires 2 people. Tools Needed: Hammer, Phillips Head Screwdriver, Pliers,
and a 7/16" Nut Driver.
NOTE: Do Not tighten any bolts unless instructed to do so. Tightening too soon may prohibit parts
from fitting together. All hex nuts should be on the inside of the grill unless stated otherwise. Unpack
all contents in a well cleared and padded area.
Estimated Time: 45 minutes
Part No.
COUNTERSUNK SCREW
1
HEX NUT
2
FLAT WASHER
3
RUBBER GASKET
4
#10-24 SCREW
5
Description Photo
8036_OM_A.1
QTY
6
4
4
4
4
B-3